Latest ci pipeline repair Tenders | Government ci pipeline repair Tenders

State Government

CTN :45083613

13 May, 2026 14.42 Lacs

Delhi - Delhi

Tender For providing access control system gas pipeline system in laboratories audio and video system and other works in new annex building in forensic science laboratory rohini delhi

Central Government/Public Sector

CTN :45082405

30 Jun, 2026 NA

Duliajan - Assam

Tender For supply of import substitution of items by indigenous development - crome casing pipes, chrome tubing pipes, drill pipes, heavy weight drill pipe, drill collars and lifting plug, drilling stabilizers, drilling/ workover handling tools --- elevators, tongs,, slips etc., potassium formate, solid control equipment --- mud cleaner/ degasser/, centrifuge/ linear motion shale shaker, sucker rod pump (srp) and its accessories:, tubing conveyed sucker rod downhole pump, rod conveyed sucker rod downhole pump, downhole gas separator, downhole anchor catcher, srp fishing tools:, overshot, spares for overshot (grapple, control, guide etc.), srp insert pump, ethyl mercaptan, low shear velocity fluids/polymers, emd chemical dosing pump, reciprocating pump, hsp 20/40, isp 20/40, isp 30/50 mesh, pig tracker/transmitter, pipeline locator, logging cables, tri cone roller drilling bits of various sizes, 11"od standard reverse circulating junk basket & 7.7/8" od reverse, circulating junk basket, pdc drill bits of various sizes, fishing tool; 6.5/8 inches od junk sub for operation inside 8.1/2 inches hole, impression block for 4.5 inch od, 5.0 inch od, 9.625 inch od & 13.375 inch od, casing, pneumatic spinner, 5.1/ 2" premium threaded casing (grade: n80 & grade p110), cased hole logging units with tools and accessories along with, installation, commissioning and training, wireline mast unit, including training and installation& commissioning, oil well explosives: (i) 2-1/8 inch tubing cutter along with detonator and, hardware accessories, (ii) 1-9/16 inch tubing puncher/ circulation charge & hardware accessories, oil well explosives: explosives for baker pressure setting tools: power, charge, primary ignitor & secondary ignitor, procurement of oil well explosives used in exploration and production of, hydrocarbon, (i) deep penetration charges, (ii) resistoriess detonator assy,, (iii) deto cord 80 hmx nylon ls 1.4s, (iv) 54 mm strip carrier, 6spf, 12 ft/3 m long, (v) detocord /charge clips, (vi) tandem connector ,2.1/8" stri p carries, (vii) splice boot for lead wire, (viii) detonator cord retainer, (ix) 53.975 mm (2.1/8") od firing head assy, (x) nut & bolt for connecting strip, (xi) nut & bolt for connect tandem(xii) deto cord end seal (100 nos./pkt), (xiii) 2.1/8" charge tightening wrench, 27.1/2" (698.50 mm) rotary table, 7.1/16" x 10 m double ram bop with accessories, 13.5/8" x 10 m single ram bop with accessories, 3.1/16" x 10 m flexible steel hoses for choke manifold, 3.1/8" x 5 m flexible steel hoses for choke manifold, 2.1/16" x 5m - ss flexible steel hose 3.1/16" x 10m - ss flexible steel hose, 3.1/8" x 5m flexible steel hoses, thermal wellheads for 7" and 9.5/8" casing completion with installation &, commissioning, hose vibrator, rotary hose, drilling in assorted length, 2.34 mm (0.092") piano wireline (well measuring line), static gel strength analyzer, electronic reservoir pressure and temperature measuring gauge., automatic distillation apparatus, ft ir spectrophotometer, rheometer, 350 short ton drilling hook & elevator links (250 short ton, 350 short ton, and 500 short ton), digital acoustic liquid level measuring cum dynamometer equipment, (echometer), cross over, premium box x api eue & pup-joint, 2.7/8", premium in assorted, length, geological thin section preparation unit comprising of cutting, vacuum, impregnation, grinding and polishing equipment and consumables., polarised microscope, pony drill collar, premium tubing, 37.1/2 rotary table, air gas permeameter, double block and bleed isolation plug, gas chromatograph, low to moderate temperature cement retarder, high temperature fluid loss control cement additive, xcd-polymer, xc-polymer (premium), poly anionic cellulose-regular, poly anionic cellulose-super lo, junk sub 5.1/2 inch & 7 inch, 13.5/8-inch x 10000 psi annular bop, 13.5/8-inch x 10000 psi double ram bop., ct reels, super fishing jar, drilling jar, overshots, slammer l

Central Government / Public Sector

CTN :45084702

26 May, 2026 3.90 Lacs

Hyderabad-T - Telangana

Tender For supply of high-pressu seamle ste c g cylind filled , high-pressur seamles stee n2 nitrogen ga cylinde filled , co2 changeove hig pressur automati mechanical , n2 changeove hig pressur automati mechanical , gas distributio panel fo 1 outlets , ss tubin pipeline , p u tubing m od , fittings , support casin includin pv casing capping , testin and commissioning

CTN :44944714

15 May, 2026 1.66 Crore

Anandpur Sahib - Punjab

Tender For corrigendum : construction of revetment and stud on left side of swan river near village dayapur to protect the gas pipeline of gail india pvt ltd under teh nangal distt rupnagar

CTN :45071501

25 May, 2026 NA

Pune - Maharashtra

Tender For providing of maintenance and pigging service for oil and gas pipelines - as per the tender document; pune hazarwadi pipeline cleaning; as per the tender document,maintenance and pigging service for oil and gas pipelines - as per the tender document; pune hazarwadi pipeline mfl run; as per the tender document,maintenance and pigging service for oil and gas pipelines - as per the tender document; pune hazarwadi pipeline final report; as per the tender document,maintenance and pigging service for oil and gas pipelines - as per the tender document; pune hazarwadi pipeline egp run (optional); as per the tender document,maintenance and pigging service for oil and gas pipelines - as per the tender document; hazarwadi pakni pipeline cleaning; as per the tender document,maintenance and pigging service for oil and gas pipelines - as per the tender document; hazarwadi pakni pipeline mfl run; as per the tender document,maintenance and pigging service for oil and gas pipelines - as per the tender document; hazarwadi pakni pipeline fin

CTN :45076311

14 May, 2026 5.10 Crore

Varanasi - Uttar Pradesh

Tender For construction of 150 bedded critical care hospital and vertical extension for 5th floor of existing trauma centre hospital including water supply, sanitary installation, internal electric installations, fire fighting, fire alarm system, lifts, cctv, sub-station, dg set, ups system hvac, bms, modular operation theaters, nurse call system, medical gas pipeline system and development works at trauma centre, bhu, varanasi (sh: mgps) (at risk and cost of m/s jai prakash and sons under clause 14)

CTN :44956738

06 May, 2026 NA

Jammu - Jammu And Kashmir

Tender For bid to ras supply of manifold system and medical gas pipeline system, bed head panles with switch socket

State Government

CTN :44768656

11 May, 2026 NA

Delhi - Delhi

Tender For corrigendum : supply of laboratory furniture : : - island granite top workbench with sinks on both ends , island granite top workbench without sink , l shape granite top wallside workbench , fume hood , washing lab sink table 1 , washing lab sink table 2 , store room slotted angle rack with phenolic resin top , island granite top workbench with sinks on both ends and spot fume extractors with lpg lines , wall side granite top workbench , lpg gas bank system with pipeline job

Central Government/Public Sector

CTN :44698679

06 May, 2026 1.39 Crore

Bhilai - Chhattisgarh

Tender For bid to ras providing of custom bid for services - various repair jobs of emd - overhauling/dismantling of the existing w ater drainer by isolating the drainer by putting blank plate after isolation valve. purging/removal of trapped gas from the seal pot/pipe line by injecting st eam/nit rogen. revisioning of all parts & cleaning of pot. if required, the complete seal pot w ith pipe line has to be new ly fabricated & erected as per the instruction of o.a. or as per draw ing. after erection, testing of pot by injecting st eam/nit rogen and de-isolation/commissioning. the condensate pipe from w ater drainers has to be laid to the nearest storm w ater manhole or as directed by o.a.s representative. painting of w ater drainer and pipes to be done after the erection job , "technical cleaning of gas pipeline water drainers. the w ork involves closing/blanking of valves, st eam purging of pipe/drain pot and opening of f langes of seal pot and removal of muck/deposit from pots, revisioning of gas inspection valve,w ater filling valves,condensate valves. fixing of new packing and tightening of f langes. filling of w ater in the seal pot and de-blanking of w ater drainer/opening of valves. checking for any leakages and rectification of the same " , the job involves cutting/dismantling of corroded structures like column, platforms, w alkw ays, staircases etc. at height. before cutting of any structure, the nearby pipe lines or any other equipment to be supported f irst. the dismantled structures should not be throw n from height. all the dismantled structure to be kept at one place as directed by o.a.s representative for disposal by bsp , the job involves fabrication of st eel structures like column, platforms, w alkw ays, staircases etc. by type 1 electrode, as per approved draw ing / specification or as directed by oa/oa¿s representative complete in all respect including painting. fabricated structures w ill have to be erected by the contractor at height as per the direction of operating authority , the job involves w elding of tack w elded pipes, gland compensators, disc compensators, flanges, st eel structures, gas pipeline equipment, plates, pipes, structures w ith type 1 w elding electrodes , dismantling of gas pipe line or any other pipe line by cutting, including handling and stacking, cutting into pieces and sections as directed by oa/oa¿s representative & stacking at designated location. before cutting the nearby pipe lines/platforms/equipment to be supported. all dismantled structural items to be kept at a particular place, as show n by o.a.s representative for disposal by bsp , job involves erection of fabricated/available pipes at locations show n by o.a./o. a' s representative, including dia. 100mm at heights. erection job involves, lifting of standard length of pipes supplied by bsp free of cost, w elding w ith the existing pipes/valve f langes and testing of pipe w ith st eam/nit rogen and defect rectification w ith type i electrode. any accessories like bleeder pipe, drainer pipe, purging nipples, valves,compensators, saddle supports etc. also to be erected, as directed by o.a , fabricated/available pipes at locations show n by o.a./o.a. s representative, above dia. 100mm and up to dia. 200mm at heights. erection job involves, lifting of standard length of pipes supplied by bsp free of cost, w elding w ith the existing pipes/valve f langes and testing of pipe w ith st eam/nit rogen and defect rectification w ith type i electrode. , fabricated/available pipes at locations show n by o.a./o.a. s representative, above dia. 200mm and up to dia. 500mm at heights. erection job involves, lifting of standard length of pipes supplied by bsp free of cost, w elding w ith the existing pipes/valve f langes and testing of pipe w ith st eam/nit rogen and defect rectification w ith type i electrode. any accessories like bleeder pipe, drainer pipe, purging nipples, valves, compensators, saddle supports etc.also to be erected, a

Central Government/Public Sector

CTN :40996039

25 May, 2026 61.07 Crore

Tirupati - Andhra Pradesh

Tender For corrigendum : laying of underground gas pipeline in nh-716 of tirupati to tiruthani to chennai section along the road from km. 61/510 to km. 81/540 (rhs) and km. 107/600 to km. 115/600 in the state of ap and from km 45/500 to km 61/510 (rhs) in the state of tn

Ci Pipeline Repair Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

Central Government/Public Sector

Central Government / Public Sector

State Government

Central Government/Public Sector

Central Government/Public Sector